Milwaukee M12BSWP M12 Brushed Stick Water Pump (Kit)
The new M12 HYDROPASS brushed stick water pump joins the M12 cordless system, the largest sub-compact system on the market, focused on delivering industry-leading durability and power in the tightest spaces.
Delivers superior filtration for uninterrupted pumping in catch basins, water meter boxes, trenches, sump pump pits, and more.
Featuring a 36” submersible aluminium barrel, this transfer pump provides the extension needed to reach water at the bottom of trenches and difficult-to-reach areas.
MILWAUKEE’s new HYDROPASS filter technology maximises water flow in heavy debris to effortlessly pump up to 34 litres of water per minute.
The 360-degree filter minimises downtime caused by clogging, increasing productivity on the job.
The HYDROPASS brushed stick water pump eliminates the hassle of set-up time and provides the user with a continuous run time of up to 1000 l per charge.
| Specification | Details |
|---|---|
| Filtration | HYDROPASS filter |
| Flow rate | 34 l/min |
| Liters per charge | Up to 1000 l |
| Max. head height | 4.5 m |
| Max. water temperature | 60 ºC |
| Inlet | 85 cm barrel with HYDROPASS™ filter |
| Outlet | ¾” (19 mm) standard garden hose thread |
| Pump length | 123 cm |
| Weight | 2.0 kg |
| Note | Body only – not supplied with batteries or chargers |
| Warranty | Exclusive 3 Years Warranty on all Milwaukee Power Tools including Batteries & Chargers when registered |
| Extreme Temperature Use | Can be used in extreme temperatures down to -20 ºC without compromising on runtime and battery life. Discharge protection prevents cell damage from over-discharge. |
| Kit Includes |
|
Related products
Fixaline FIXER 10
- FIXER 10 is a high-speed pipe cleaning machine.
- Unit can be used for pipe cleaning, grinding, drilling and coating.
- Big puncture-proof wheels make FIXER 10 easily movable in every environment, even in stairs.
- Electrical safety clutch protects operator, machine, shaft and rotating tool.
- FIXER 10 is more powerful, faster, lighter and safer than other similar products on market.
Milwaukee M12™ – M18™ Fast Charger
- Universal Compatibility: Recharges all M18™, M14™ and M12™ REDLITHIUM™ battery packs.
- Efficient Charging Logic: Charges in sequence – first in, first to charge – minimizing charge cycle management time.
- M12™ Battery Recharge Times: 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah recharge in 26 min / 50 min / 52 min / 95 min or less.
- M18™ Battery Recharge Times: 2.0 Ah / 4.0 Ah / 5.0 Ah recharge in 26 min / 52 min / 59 min or less.
Cyclone Chain Knockers (for 10mm & 12mm cable connections)
Suitable for use with pipes that are in a bad state or even cracked / smashed.
The Cyclone Chain easily removes hard materials such as lead, tree roots and concrete. It is also used to eliminate any excess debris after removing collapsed liner inside cast iron pipes.
Materials:
Stainless Steel Chains, Carbide Tips
- WC-2100-4 – 100mm cyclone chain knocker, 10mm cable connection
- WC-2150-4 – 150mm cyclone chain knocker, 10mm cable connection
- WC-3100-4 – 100mm cyclone chain knocker, 12mm cable connection
- WC-3150-4 – 150mm cyclone chain knocker, 12mm cable connection
Pipe Type:
Cast Iron, Concrete, Stainless Steel
Centering Axels and Cable Connectors
Centering Axels are used to centralize different Renssi® Tools to get the best result for your job. Suitable tools are for example RCD and RLC tools. Centering Axel has high quality ballbearings inside to make it rotate well. The cable connectors can connect centering axel or another cable to your cable.
Centering Axels
- RCA-050 – for 50mm pipe
- RCA-075 – for 75mm pipe
- RCA-100 – for 100mm pipe
- RCA-150 – for 150mm pipe
Cable Connectors
- CC-050 – for 50mm centering axel
- CC-100 – for 100mm centering axel
- CC-150 – for 150mm centering axel
GENERAL ELECTROMECHANICAL DRAIN CLEANERS
- All GENERAL Electromechanical Drain Cleaners use FLEXICORE wire rope centre cables.
- Heavy gauge wire is coiled around 42-strand wire rope and heat treated for maximum durability.
- Cables offer high strength and the correct flexibility for optimal performance.
- Electric machine cables are wound left hand to ensure reliability and consistency during operation.
- 1/4″ and 5/16″ cables are equipped with basin plug ends for specific applications.
- Cables of 3/8″ (10mm) and larger can be fitted with cutters via female connectors, enhancing versatility.
