90° RENOPATCH
- For patch lining 90° bends.
- High quality multi-axle glass cloth for extra strength and better finish
- Compact packaging
- Easy installation
- Cost effective solution
- 100% non-shrink silicate resin, minimum odour, non solvent
- Kits available for 100mm Ø pipes upwards
Renopatch® Part A Resin cured with Renopatch®Part B Isocyanate is a high-performance 2-component urethane resin system designed to impregnate glass-fabric for fast patch repair of underground pipes by polymerization at ambient temperature.
Kits available for 100mm Ø pipes upwards
There are three variations:-
– Renopatch Fast Fast curing speed
– Renopatch Standard Medium curing speed
– Renopatch slow Slow curing speed
Benefits
– Low viscosity – wets out glass fabric exceptionally well
– Three speeds to suit different ambient temperatures
– High-strength on full cure
*curing speed is heavily dependent on circumstances of use and some experimentation may be necessary
Related products
2-PART SILICATE RESIN FOR RENOPATCH
Available as Fast and Slow Cure
- Chemical Datasheets
- Chemical Mixing Charts
SLOW CURE SYSTEM IN BULK SIL2S
- Bulk pack sold in 40kg kits comprising 20kg of part A, 20kg part B
- Ideal for installations in lower ambient temperatures
- Cures in approximately 80 minutes at 16°C or 110 minutes at 12°C
- 100% non-shrink silicate resin, minimum odour, non solvent
FAST CURE SYSTEM IN BULK SIL2F
- Bulk pack sold in 40kg kits comprising 20kg of part A, 20kg part B
- Ideal for installations in lower ambient temperatures
- Cures in approximately 30 minutes at 16°C or 45 minutes at 12°C
- 100% non-shrink silicate resin, minimum odour, non solvent
PROFLEX LINER (For inversion)
- Stitched and welded seam
- Extremely flexible
- Good expansion quality
- For use in bends up to 90°
- Low Friction
- For air-tight and water-tight applications
