RENOPATCH FAST CURE
- Ideal for installations in lower ambient temperatures
- High quality multi-axle glass cloth for extra strength and better finish
- Compact packaging
- Cost effective solution
- 100% non-shrink silicate resin, minimum odour, non solvent
- Kits available for 100mm Ø pipes upwards
Renopatch® Part A Resin cured with Renopatch®Part B Isocyanate is a high-performance 2-component urethane resin system designed to impregnate glass-fabric for fast patch repair of underground pipes by polymerization at ambient temperature.
Kits available for 100mm Ø pipes upwards
There are three variations:-
– Renopatch Fast Fast curing speed
– Renopatch Standard Medium curing speed
– Renopatch slow Slow curing speed
Benefits
– Low viscosity – wets out glass fabric exceptionally well
– Three speeds to suit different ambient temperatures
– High-strength on full cure
*curing speed is heavily dependent on circumstances of use and some experimentation may be necessary
Related products
SUPERLINER (Drag-in)
- SL100 – Superliner 100mm x 3mm low friction liner – 4 inch (per metre)
- SL125 – Superliner 125mm x 3mm low friction liner – 5 inch
- SL150 – Superliner 150mm x 3mm low friction liner – 6 inch
- SL175 – Superliner 175mm x 3mm low friction liner – 7 inch
- SL200 – Superliner 200mm x 3mm low friction liner – 8 inch
- SL225 – Superliner 225mm x 3mm low friction liner – 9 inch
- SL250 – Superliner 250mm x 3mm low friction liner – 10 inch
- SL300 – Superliner 300mm x 3mm low friction liner – 12 inch
- SL225X6L – Superliner 225mm x 6mm felt liner (min 10 mtrs) – 9 inch
- SL300X6L – Superliner 300mm x 6mm felt liner (min 10 mtrs) – 12 inch
- SL375X6L – Superliner 375mm x 6mm felt liner (min 10 mtrs) – 15 inch
2-PART SILICATE RESIN FOR RENOPATCH
Available as Fast and Slow Cure
- Chemical Datasheets
- Chemical Mixing Charts
SLOW CURE SYSTEM IN BULK SIL2S
- Bulk pack sold in 40kg kits comprising 20kg of part A, 20kg part B
- Ideal for installations in lower ambient temperatures
- Cures in approximately 80 minutes at 16°C or 110 minutes at 12°C
- 100% non-shrink silicate resin, minimum odour, non solvent
FAST CURE SYSTEM IN BULK SIL2F
- Bulk pack sold in 40kg kits comprising 20kg of part A, 20kg part B
- Ideal for installations in lower ambient temperatures
- Cures in approximately 30 minutes at 16°C or 45 minutes at 12°C
- 100% non-shrink silicate resin, minimum odour, non solvent
STITCHED FLEXILINER (For inversion and Drag-in)
- Double heat-welded and stitched seam for added strength
- PVC Thinner outer coating for added flexibility
- For use in any inversion machine, and can also be dragged-in
- For use in bends up to 45°
- Low Friction
- For air-tight and water-tight applications
- Fast resin absorption
| Product Code | Product Name |
| FL100/STITCH | 100mm 3mm thick Stitched Flexiliner |
| FL125/STITCH | 125mm 3mm thick Stitched Flexiliner |
| FL150/STITCH | 150mm 3mm thick Stitched Flexiliner |
| FL175/STITCH | 175mm 3mm thick Stitched Flexiliner |
| FL200/STITCH | 200mm 3mm thick Stitched Flexiliner |
| FL225/STITCH | 225mm 3mm thick Stitched Flexiliner |
| FL300/STITCH | 300mm 3mm thick Stitched Flexiliner |
